Available in two designs. Each standard escutcheon is supplied with one (1) push-nut. The “Tuff-Nut” escutcheon features oversized dimensions, one inch of exterior thread and is supplied with a threaded flat washer nut. All escutcheons have an I.D. hole diameter to fit a 3/8 inch key.

Aluminum
ES15AL
1.5" Aluminum Escutcheon
Lightweight aluminum escutcheon features an I.D. hole diameter that will fit a 3/8″ key. One(1) Push-Nut is included.
ES20AL
2.0" Aluminum Escutcheon
Lightweight aluminum escutcheon features an I.D. hole diameter that will fit a 3/8″ key. One(1) Push-Nut is included.
ES27AL
2.75" Aluminum Escutcheon
Lightweight aluminum escutcheon features an I.D. hole diameter that will fit a 3/8″ key. One(1) Push-Nut is included.
Brass
ES15YB
1.5" Brass Escutcheon
Elegant looking Brass escutcheon features an I.D. hole diameter that will fit a 3/8″ key. One(1) Push-Nut is included.
ES20YB
2.0" Brass Escutcheon
Elegant looking Brass escutcheon features an I.D. hole diameter that will fit a 3/8″ key. One(1) Push-Nut is included.
ES27YB
2.75" Brass Escutcheon
Elegant looking Brass escutcheon features an I.D. hole diameter that will fit a 3/8″ key. One(1) Push-Nut is included.
Stainless Steel
ES15SS
1.5" Stainless Steel Escutcheon
Stainless steel escutcheon features an I.D. hole diameter that will fit a 3/8″ key.
One(1) Push-Nut is included.
ES20SS
2.0" Stainless Steel Escutcheon
Stainless steel escutcheon features an I.D. hole diameter that will fit a 3/8″ key.
One(1) Push-Nut is included.
ES27SS
2.75" Stainless Steel Escutcheon
Stainless steel escutcheon features an I.D. hole diameter that will fit a 3/8″ key.
One(1) Push-Nut is included.
Aluminum
ET15AL
1.5" Aluminum Tuff-Nut
Aluminum Tuff-Nut features an I.D. hole diameter that will fit a 3/8″ key.
ET20AL
2.0" Aluminum Tuff-Nut
Aluminum Tuff-Nut features an I.D. hole diameter that will fit a 3/8″ key.
Brass
ET15YB
1.5" Brass Tuff-Nut
Brass Tuff-Nut features an I.D. hole diameter that will fit a 3/8″ key.
ET20YB
2.0" Brass Tuff-Nut
Brass Tuff-Nut features an I.D. hole diameter that will fit a 3/8″ key.